Page Copyright: Beijing Dongxing Lubricant Limited Company
"People's Republic of China telecommunications and information services business license"
京ICP备05017824号-1 Powered by www.300.cn
SE- Synthetic Cutting Fluid
SE- Synthetic Cutting Fluid
SE- Synthetic Cutting Fluid is a new type of metal working fluid using the cutting-edge technology of the world at present. Main components are selected and imported all around the world. The product has outstanding antirust performance and can withstand hard water with total hardness of over 500ppm. It is especially fit to be applied to technological condition without oil. Its application performance is up to the advanced level of international similar products. This product is unfit to process stainless steel and other hard materials.
Main characteristics:
Desirable antirust performance and long rust protection life inner processes;
High degree of finish for grinding; the extreme pressure property meets the technological requirements;
Non-toxicity, no pungent smell, without nitrate and diethanolamine; The conclusion of the acute oral toxicity test by the Chinese Academy for Preventive Medicine is“non-observed toxicity”, which meets the world’s leading safety and health requirement featuring people foremost;
Hard water stable and highly applicable to water (as long as the water is clean);
Low-foaming and excellent defoaming technology protects your working environment;
The product can be used for one continuous year or longer time without replacement if maintained properly;
Sealed in the packing bucket, the original concentrate can be kept for a long time without deterioration.
Main Specifications: GB / T 6144 -1985
Items |
Quality Index |
Experiment method |
|||
Concentrate storage stability |
No demixing, phase transition or gum |
GB / T 6141 / 5.3 |
|||
Concentrate Appearance |
Light yellow transparent or translucent uniform liquid |
Visual |
|||
5% Dilute solution
|
|
SE-Ⅰ |
SE-Ⅱ |
GB / T 6144 / 5.5 |
|
pH value |
8.5-9.2 |
|
|||
Transparency |
Uniform translucent |
Visual |
|||
Antirust test(35℃±2 ℃ A Grade cast iron) h |
Monolithic |
48 |
48 |
GB / T 6144 - 85 |
|
Laminations |
8 |
8 |
|||
Corrosion Test(55±2 ℃ Immersion) h |
Steel |
48 |
48 |
GB / T 6144 / 5.8 |
|
Copper |
8 |
8 |
|||
Aluminum |
8 |
2 |
|||
Defoaming property, 5 minutes |
Less than 2 ml |
GB / T 6144 / 5.6 |
|||
Adaptability to the paint of machine |
Qualified |
GB / T 6144 - 85 |
Application:
Put the calculated amount of concentrate into the fluid reservoir with enough water, and then turn on the fluid feeding pump to circulate and stir till uniform.
Working concentration:
Generally the working concentration is 4%~8%.
Note: It is prohibited to be blended with cutting fluid of other type or brand. Before using this product, be sure to thoroughly clean the fluid reservoir and fluid feeding system of the machine tool. Otherwise, rust protection and service life will definitely be affected.